Test and Measurement

Automated Hybrid Motor Functional Tester

Another integrated fully automated Tester on PXI (14 slots) platform.
Following hardware were used :
  • PXI-4072, FlexDMM & LCR meter.
  • PXI-6220, M Series DAQ.
  • PXI-2503, 24 Channel Relay MUX.
  • PXI-7356, 6 Axis Flexmotion.
  • PXI-7344, 4 Axis motion controller.
  • PXI-6608, Timing I/O Module.
  • PXI-8422 RS232.
  • PXI-4461, Dynamic Signal Analyser.
  • PXI-GPIB.
  • PXI-6515, Industrial I/O.
  • PXI-8196 Pentium 2.0 GHz Controller.
Test Parameters For Automated Hybrid Motor Functional Tester
  • Current measurement.
  • Voltage measurement.
  • Step angle & Directional test (Encoder measurement, high speed counter).
  • Noise test (Using accelerometer).
  • AC Dielectric Testing.
  • Torque Measurement on
  • Pull Out Torque.
  • Holding Torque.
  • Detent Torque.

Photodiode Function Tester
  • BPW34/104 PC-Based Tester0X software is developed to test BPW34/104 Photodiode device using Manual Test Adapters or by Automatic Handlers. The software follows the testing procedure as described in the PV or test specification released by the customer to GIT.

 FMASTER FUNCTION TESTER
  • The FMaster IR Function Tester is developed specifically to test various parameters involving IR Receiver Module IC along side with an Automatic Handler or a Manual handler.

  •  It can provide excitation such IR light irradiation up to 100 kHz. It can measure output parameters such as pulse width, pulse count, voltage and current.

  •  It can communicate and control two (2) handlers at the same time, which are running in parallel.

Minicon Function Tester
  • Minicon IR Function tester is developed to test IR Receiver Module device using Automatic Handlers under Hot or Cold condition.  A single parametric test includes a total of 4 parameters for this tester. The tester will be used along side with a taping machine. The software follows the testing procedure as described in the PV or test specification released by the customer to GIT.


Software Development

Continuous Emission Monitoring System

  Feature :
  1. Report Generation,
  2. Trending/Alarm logging,
  3. Transfer data to DOE/NEA.
  • Real time Data can be accessed remotely, on Internet web browser eg. IE, FireFox etc.
  • The building manager can access the actual information at home through Smartphone like Iphone or Ipad.





  Building Automation System
  • Monitor and control of building, include the air-con system, electrical system, temperature, Power monitoring etc.
  • Real time Data can be accessed remotely, on Internet web browser eg. IE, FireFox etc.
  • The building manager can access the actual information at home through Smartphone like Iphone & Ipad.



  QC Checking System
  • Using NI LabVIEW to combine 3 tests of Torque checking, Vision Checking & Height checking of Car Audio Face plate.




 
Fuji Master Engineering Sdn Bhd (414702-A)
No.6, Jalan Perniagaan Setia 1/13, Taman Perniagaan Setia II, 81100 Johor Bahru, Johor, Malaysia.
+6017-705 6770
+607-511-5196
sales@fujimaster.com
Switch to Mobile Version